It’s Tutorial Tuesday … and today I do have a polymer clay tutorial, but likely not the kind you were expecting.
We all have them, those grimy gross tools that have that “clay muck” residue from years worth of claying on them … or is that just me?! As I looked at them today in my studio, I thought, “ugh, these are disgusting.” And yes … they were. So … I guess it’s time to clean them. For those of you who have ever tried soap and water to clean your tools, you know that this just doesn’t work. Today I will share with you the best, quickest, and easiest way to remove that clay residue.
Supplies Needed to Remove “Clay Muck” from Your Polymer Clay Tools
- Tools covered in “clay muck” – duh, right?!
- Rubbing Alcohol – You can use any kind, it does NOT have to be the 90%+ variety
- Bird’s Eye Cleaning Cloths OR an Old Towel
- Old Toothbrush
- Old Bowl
- Patience … lots of it
First let me emphasize contrary to what many people tell you, you DO NOT need to have the 90%+ variety of rubbing alcohol. Most of you have 70% in your medicine cupboards at home right now. This will work. You do NOT need to go to the store to buy a particular kind. If you want to know more about rubbing alcohol to remove clay pigments, you can refer to this post here. Know that rubbing alcohol breaks down the polymer and can be used in many ways: cleaning your hands, removing “dirt” and grime from a finished (unbaked piece), removing excess mica powders or chalks, and much more.
Secondly, you do need patience for this. Now, this could honestly be because I have used both the handle to my pasta machine & this dotting tool for about 6 years … and never ONCE cleaned the “clay muck” off. Ouch. Shame on me. If you have newer tools or tools that don’t have 6 years worth of “clay muck” on them, you won’t have to be as patient as I was.
How to Clean Your Polymer Clay Tools
The first thing that I needed to clean was my pasta machine handle. I mean, look at it … that’s just gross. I knew that rubbing alcohol worked to clean up clay residue, but I didn’t know if it would work to take off large amounts of “clay muck.”
Soak your tool in a rubbing alcohol bath for about 5 minutes. I just sat and rotated the handle every 20 seconds or so … very tedious. I told you that patience was required.
After the first five minutes I took my cleaning cloth and soaked it lightly on the corner with clean rubbing alcohol. Then I began to rub … and rub … and rub … and scrub. Well, while that worked, the “clay muck” was honestly just to thick. So … I went and got an old toothbrush that sits by my polymer sink. I let it sit in the rubbing alcohol for about 30 seconds and then began to scrub … and scrub … and scrub.
So after 35 minutes of using a cloth, then a toothbrush, then a cloth, and then a toothbrush, this is what I ended up with. Honestly, I could have kept going, but I was so tired of scrubbing that handle, I just gave up. Here’s the point though, even 6 years worth of “clay muck” on your handle can come off. You don’t have to throw it away or resign it as “dead.” Just spend some time cleaning it.
Cleaning My First Polymer Clay Tool
Double Ended Ball Tool – The Last Ball Tool You’ll Ever Need
While a set of ball tools may be nice, most sculptors only ever use a single ball tool to smooth seams and make designs, impressions, and dots on their sculpts. I’ve found this ball tool to be the perfect size for all my needs. It’s got a double-ended tip and depending on how you sculpt and you can choose your tool! You choose the finer ball-tipped tool, or the more every day double-ended tool where both tips are mere millimeters apart in size.
No refunds. No returns.
Cured Polymer Cleaning of Uncured Polymer
This tool is so very special to me and yes, it’s gross too with those 6 years of “clay muck” clinging to all its nice parts. [You can get this tool here in my shop.] Seven years ago, my very first book I bought to learn polymer clay was Lisa Pavelka’s book, “The Complete Guide to Polymer Clay” (read my review here). One of the things Lisa is that ‘most people make art better with art in their hands.’ I’m paraphrasing here, but I think you get the idea.
The tool shown at the left is the very first thing I ever made with polymer clay. I had zero experience and zero expectations. Honestly, I think it turned out pretty darn good for the first time I ever did anything with polymer (see top photo). Now granted, this looks pretty bad in this photo … why? Because it’s covered in gross “clay muck.”
Repeating the same process that I used above (except I did NOT soak this tool), I began the process of scrubbing this tool with rubbing alcohol & my bird’s eye cloth. After about just 10 short minutes, my tool looked as good as it did the day I made it. I am so happy I took the time to clean my tools.
Sculpt Your Dreams,
Magic Mister – Detailing Brush for Polymer Clay – Set of 2$1.95
White Wax Pick Up Pencil$1.00
Marjorie’s Magnificent Blending Brush Duo$3.95
Splendid Spoon & Spatula Sculpting (s5) Tool for Miniatures$7.95
Teflon Sheet for Polymer Clay – ONE sheetProduct on sale
Lolly’s Lovely Brush – Flat Angled Miniature Brush$4.49
Carousel Mica Powder – Almond Pearl with Golden Undertones$1.00 – $2.95
Mica Powder Sample$1.00 – $13.49
Millefiori Flower Cane Star Shaped Slices – 3g Small JarProduct on sale