How to Embed a Bead into Polymer Clay

Posted on 7 Comments
Mini-Tutorial How To Embed a Bead Into Polymer Clay by KatersAcres

 How to Embed a Bead Into Polymer Clay

Sometimes It’s NOT as Easy As It Looks

For anyone who’s a self taught polymer clay artist, you’ve already made some critical mistakes in claying.  You tried a shortcut (that didn’t work) or tried a way to do something that ended up ruining your piece.  It’s okay, don’t worry, we’ve all been there.  This month we are going “back to basics” in creating with polymer clay.  So for today’s mini tutorial we’re going to go over the proper way to embed a bead into polymer clay.

How To Embed a Bead into Polymer Clay

Proper Procedure on How To Embed a Bead in Polymer Clay on KatersAcres Blog

At left, you will see step by step pictures on how to properly embed beads into polymer clay.  As many new clayers find out, simply “pressing” a bead into clay will not make it hold.  You have to either use liquid polymer clay to adhere it to the clay, or you have to embed it with wire.

  • First choose a 24-28 gauge copper wire.  (I usually use black 28 gauge copper or 24 gauge silver anti-tarnish wire).
  • String bead onto about 1.5″ of wire. (Length of wire depends on size of bead).
  • Using round nose pliers hold the ends of the wire steady and begin to twist the bead.
  • One you have a twist approximately 1/4-1/2″ inch long, cut the ends of the wire with flush cutters.
  • Then embed the bead into the area of polymer clay where you wish the bead to be placed.
  • Make sure you embed the bead PAST the wires.
  • Cover the bead with clay pieces/elements to ensure it will never move or fall out (see photo above).

Thanks for joining me today,
Happy Claying,

7 thoughts on “How to Embed a Bead into Polymer Clay

  1. I am making a 3/4”x 12” wand utilizing a piece of twisted tree branch, some glass beads, & adding swirls and leaf details with clay. I’m stumped on whether to use FIMO air light clay or PREMO polymer clay. Does everything get layered onto the branch and then all is oven baked? What type of accent paint? Would Pebeo pearlescence, metallic adhere to clay?

    I’ve been researching many websites for some direction. Any suggestions would really be appreciated. Thank you

    1. I would use Premo polymer clay. Once your wand is baked you can use just about any acrylic paint you would like. Pebeo does adhere to polymer clay. Enjoy the process!

  2. Thank you for all your help I am just learning and having fun with my
    granddaughter
    Denice

    1. You are most welcome Denice! Enjoy and have fun claying.

  3. All great advice. In addition to the above Christi Friesen recommends bending the end of the wire into a little hook to anchor it in the clay. I’ve used this technique in all my clay work and never had a bead come loose. I’ve lost a few magnets but that’s a different topic all together. Thanks for the wonderful tips.

    ~R. Wyrm

  4. Thanks for the tutorial. I know it is going to come in handy with my dragon…can’t wait for Friday!!!

  5. Thanks, Katie. I learned the hard way that these beads need to be secured with wire as well as eyelids and so on. Thanks for sharing.

Leave a Reply

Your email address will not be published. Required fields are marked *