October Pavelka Project: Making Canes

Posted on 2 Comments
Fall Polymer Clay Tutorial, Festive Masor Jar Centerpiece using Millefiori Canes | October Pavelka Project

Polymer Clay Tutorial

Making Polymer Clay Millefiori Canes & Using Them

Welcome back for another great month of the Pavelka Project! This month we a doing another more ‘open-ended’ project for you. Here’s what you need to do. Look through The Complete Book of Polymer Clay, chapter on Millefiori Canes, and make at least one cane. But don’t stop there! Use your cane to create ONE project. It can be anything your heart desires. I made a mixed media centerpiece mason mug in a fall theme for my dining room table. You can do whatever you’d like: jewelry, mixed media, household items, frames, the options are literally endless. Lisa offers literally dozens of ideas throughout all her books. I also have over 150 tutorials here on the site you could use to make a project.

Editor’s Note: The Pavelka Project ended Dec. 31, 2015. These tutorials are free for your use. All giveaways are over.

Project Details:

Materials Needed:

* Denotes optional supplies

Additional Materials to Make This Mason Jar Mug Centerpiece:


 Fall Mason Jar Centerpiece

Fall Polymer Clay Tutorial, Festive Masor Jar Centerpiece using Millefiori Canes | October Pavelka Project

Polymer Clay Tutorial Using Millefiori Canes

Preparing the Mason Jar:

  • Prepare your mason jar:
    • Wash & clean your mason jar to get any “film” off the glass. I used an old soft toothbrush with some Dawn dish detergent on it.
    • Make sure your jar is completely dry.
    • TIP: I did this the night before I did my project so it was ready the next day.
  • Gather your jar, lace, & hot glue gun
    • Take your lace & wrap it around the rim of your mason jar.
    • Trim so that the edges will just overlap.
    • Place small “dots” of hot glue around 1/4 the rim.
    • Quickly (before it dries) attach the lace.
    • Allow to cool.
    • Do this three more times, until your lace meets the end where you started.
    • NOTE: Please know that when you place your jar into the oven later, the hot glue will remelt and will soak into the ribbon causing a “glossy” effect, but it will also more permanently adhere to the glass. For this reason, do NOT “blob up” your hot glue.
    • TIP: Be sure that the place where the lace overlaps looks neat and tidy. I used this portion as the “back” of my design, later in the process.

Starting the Polymer Clay Millefiori Cane:

NOTES:

KatersAcres Fall Skinner Blend for the Fall Polymer Clay Mason Jar Table Centerpiece Tutorial | Pavelka Project
  • Because each of us may choose to make a different cane, instead of a direct tutorial, I will post process pictures of the cane that I chose to make with steps to make a similar flower petal cane.
  • Please do not follow these steps if you are making your own cane using Lisa’s book, one of my cane tutorials, or a tutorial from another cane you’ve found online.
  • I chose to base my cane off of the cane presented on page 48 in Lisa’s book.
  • Being familiar with caning, I changed and altered my design from the original design Lisa wrote about in her book, making it more like my Reversible Cane – Get the Tutorial here.
  • Choose & condition the clay you will need for your cane.
  • Begin with a Skinner Blend Plug or Skinner Blend Bullseye Cane – Get the full tutorial here.
Polymer Clay Tip - Keep Your Cane Ends | Fall Polymer Clay Mason Jar Table Centerpiece Tutorial by KatersAcres

TIP: When you cut off the ends of your skinner blend canes, don’t throw them away. Just add a crystal to the center and wah-la! Those ends make the cutest little flowers…

Making the Petal Cane for the Fall Polymer Clay Mason Jar Table Centerpiece Tutorial by KatersAcres
  • Here’s the steps I used the make the first portion of my cane.
  • You can see these steps fully explained in Lisa Pavelka’s book. [Get your copy here]
  • You will see that to make the petals of my cane, I deviated from Lisa’s book, using my own pattern, the Reversible Cane here.
  • Once you have your petals, you can follow the steps in Lisa’s book to make smaller full flower canes by reducing, slicing the petal canes into sections, and packing with additional clay.
  • I chose not to do this because I wanted stand alone, large flowers.
  • Remember that this is your cane and your project. Only you know what you are making and what results you are looking for. Follow your instinct and see what happens.
  • When the petals were done, I needed to make a leaf cane. I modified this simple leaf tutorial by adding a skinner blend in the middle and colored vein lines.
  • I used only scraps to decorate the bottom and top side of my mason jar. Remember that there is NO WASTE in polymer clay. Learn to transform your scraps into something else.
  • Assemble your flowers by cutting your petals as evenly as possible.
  • Assemble your flowers in a pleasing pattern. I wanted a single layers of petals only, but you could arrange more as shown in this tutorial.
  • TIPS:
    • Add some glitter or hot fix crystals in the center of the flowers for added pop.
    • Add metal rivets to the flowers to make a nice, clean hole to string your flowers later on. This way if you make too many, they can easily transform into gorgeous polymer clay flower pendants for some easy fall necklaces.
  • Bake all your component pieces for 45-60 minutes at 275 degrees fahrenheit (if using Premo! polymer clay).

Assemble All The Pieces:

Use your cane scraps to decorate your Mason Jar | Fall Polymer Clay Mason Jar Table Centerpiece Tutorial by KatersAcres
  • Once everything is baked, it’s time to assemble your pieces.
  • First gather, measure, & trim the appropriate lengths of raffia ribbon you will need.
  • Use additional raffia ribbon to tie onto charms you created.
  • Tie your raffia ribbon around your lace on the top of the mason jar.
  • Add a flower here and there into the knot of your raffia ribbon.
  • Finish with a big bow.
  • Display as your fall centerpiece on your dining room table, mantle, or fall arrangement.
  • Enjoy!
Polymer Clay Fall Flower Necklaces by KatersAcres

Use your leftovers and make some fall pendants for yourself or your friends (see the photo at right for how I used my “left-overs”). Tie off with simple hemp, cotton, or leather cording, and add some wooden beads for a rustic, simple & natural look that is perfect for fall.


Handmade Polymer Clay Flowers from the Fall Polymer Clay Tutorial, Festive Masor Jar Centerpiece using Millefiori Canes | October #PavelkaProject

FRIENDLY REMINDER: At the request of many, I have been trying to keep my tutorials extremely basic to allow you a jumping off point. Please note that Lisa’s tutorials in her book are highly detailed and offer many variations. In addition, any of the technique based projects we do can be adapted to many different types of claying from jewelry making, sculpture, organic components and so many more. Lisa & I put this project together so that people could grow in their love of clay and maybe learn a few new things along the way. Yes, there are many artists in our group who have skills of a master clayer, there are also those who just picked up their first block of clay last month. Be patient. Be encouraging. And NEVER give up!


The Pavelka Project

The Pavelka Project is done in conjunction with Lisa Pavelka. All tutorials are retaught here with her expressed permission. Please make sure to read about the project here and get answers to the most common FAQS here.


Sculpting Blessings,

KatieSignature

2 thoughts on “October Pavelka Project: Making Canes

  1. Das is wie eine Traum. Sehr schön. Gut arbeiten

  2. Hi Katie, nice to see you using my Teardrop Blend in your tutorial. Glad to see you like it so much that you’re sharing it with others!

Leave a Reply

Your email address will not be published. Required fields are marked *